Rotecho's PE PP film washing line is widely used to recycle waste PP/PE by shredding, crushing, washing, dewatering and drying to get clean PE PP flakes for industrial feedstock purpose.
Raw material application:
PE PP waste films, post consumer film, food contaminated film, garbage film, agriculture &mulch film, greenhouse film, PE PP woven bags, ton bags, jumbo bags, bulk bag etc.
200kg/h to 1000 kg/h, can be designed according to the film contamination status and final flakes requirement.
NOTE: We provide single machine, complete production line and turn-key solutions.
Rotecho's PE PP Film Washing Line start off with waste material often pressed in bales and end up with clean, pure and dry regrind or flakes, which is ready for densifying, re-extrudion or injection moulding. Each project is special, Rotecho provide customized proposal according to your raw material state and final product requirement. Standard processing flow shows as followed, we also accept modification on the standard proposal.
1. Crushing section: This section reduce the PE PP film size by shredder and crusher, the crusher complete the size reduction process in the water to get smaller PE PP flakes and remove the attached dirty at the same time. VIEW MORE+
2. Washing section: This is the key step to get a clean bottle flakes, there are three types washer for option, that is hot steam washer, float-sink washer, high friction washer. Customer can choose the washing method on the basis of raw material impurity content.
3. Dewatering section: The rotary screen can remove the inner water in the film flakes to get a moisture of 3%-10% PE PP flakes.
4. Drying section: Hot air drying system can reduce the moisture be lower than 3%, thus is good for packing and delivery.
Debaler, Belt conveyor, Screw feeder, Magnetic fetector, Granule bagging machine.
1. High automation, 3-4 person can operate this line, save much labor cost.
2. Humanized design (PLC integrated & separated control on each machine with emergency brake device).
3. World famous brand components applied on the production line, along with the parts contact material is full SUS304 made, which ensure our machine a longer service time.
4. Equipped with water circulating device to reduce water consumption.
5. Innovated pre-treatment system such as shredder crushing highly improve the final product quality.
|Item||PE PP Washing Line|
|Working ability||Standard scale is 200kg/h-1000 kg/h, can be customized|
|Water consumption||Standard water consumption range from 0.5m³/h-7m³/h, specific date depends|
on film contamination status and final product purity requirement.
|Space required||300-700 ㎡|
|Film scraps size||Standard is 30-60mm, customized acceptable.|